Free & private · nothing is uploaded

Online Metronome

A free metronome that keeps time on your browser's audio clock. Set any tempo from 20 to 300 BPM, tap one in, choose a time signature and a subdivision, and press Start.

Stopped

Space starts and stops. Arrow keys change the tempo, hold Shift for steps of 5. Press Tap in time with a song to set the tempo by feel.

Note lengths at 120 BPM.

NoteStraightDottedTriplet
Quarter500 ms750 ms333.3 ms
Eighth250 ms375 ms166.7 ms
Sixteenth125 ms187.5 ms83.3 ms

How to use the online metronome

  1. Set the tempo. Drag the slider, type a number from 20 to 300, or use the plus and minus buttons.
  2. Or press Tap in time with a song or with the pulse in your head. After two taps the tempo follows your taps.
  3. Pick a time signature. The first beat of every bar gets a higher click so you always know where one is.
  4. Choose a subdivision if you want clicks between the beats: eighths, triplets, or sixteenths.
  5. Press Start, or hit the spacebar. Press it again to stop. Arrow keys change the tempo while it plays.

What makes a metronome steady

A metronome has one job, and a web page can do it badly. The simple way to build one is a page timer that plays a sound every so many milliseconds. Page timers are not built for music: they fire late when the browser is busy, and the lateness adds up, so the click drifts and stumbles.

This metronome does not time the clicks with a page timer. It uses the Web Audio clock, the same clock the browser uses to play sound, and queues every click a fraction of a second ahead with an exact start time. A timer only wakes the page up to queue the next few clicks. If that timer runs a little late, the clicks that are already queued still land where they should.

Tempo, BPM, and common ranges

BPM means beats per minute. At 60 BPM there is one beat a second, at 120 there are two. The traditional Italian tempo words map to rough BPM ranges, and different sources draw the lines a little differently: largo is very slow, around 40 to 60. Adagio sits around 66 to 76, andante around 76 to 108, moderato around 108 to 120, allegro around 120 to 156, and presto from about 168 up.

If you do not know the tempo of a song, press Tap along with it, or use the Tap Tempo page. When you have the audio file, the BPM Finder reads the tempo for you.

Time signatures and the accented first beat

The time signature sets how many beats are in a bar. The first beat of each bar plays a higher click, and the largest dot in the row lights up with it. Choose 4/4 for most pop, rock, hip hop, and dance music, 3/4 for a waltz, 2/4 for a march, and 5/4 or 7/8 for odd meters.

In this metronome the BPM always counts the beats you see in the row of dots. In 2/4, 3/4, 4/4, and 5/4 each beat is a quarter note. In 6/8 and 7/8 each beat is an eighth note, so six or seven clicks make a bar. If your sheet music gives 6/8 as a dotted quarter tempo, multiply that number by three to get the eighth note tempo to enter here.

Subdivisions: eighths, triplets, sixteenths

A subdivision adds quieter, lower clicks between the beats: one extra for eighths, two for triplets, three for sixteenths. They help most at slow tempos, where the gap between beats is long and it is easy to rush. They are also the quickest way to feel the difference between straight and swung or triplet rhythms.

The subdivision splits whatever the beat is. In 6/8 and 7/8 the beat is already an eighth note, so the Eighth setting gives you sixteenth notes there.

Practicing and recording with a click

Start slower than you think you need. Play the part cleanly at a tempo where it feels easy, then raise the tempo a few BPM at a time. The arrow keys make that quick: up or right adds one BPM, down or left takes one away, and holding Shift moves in steps of five.

The table under the controls turns the tempo into milliseconds for quarter, eighth, and sixteenth notes, with dotted and triplet values. Those are the numbers to type into a delay, a reverb pre-delay, or a compressor release so the effect moves in time with the song.

Recording vocals to a click? Xport Studio, the desktop app we make, finds the key and BPM of the beat and masters the finished take, free.

Online metronome: common questions

How accurate is this online metronome?

Each click is queued on the browser's audio clock with an exact start time, a fraction of a second before it plays. It is not fired by a page timer, so a busy page does not make the beat wobble or drift.

What does the BPM count in 6/8 and 7/8?

The beats shown in the row of dots. In 6/8 and 7/8 that is the eighth note, so 6/8 at 180 BPM gives six clicks a bar at 180 a minute. In 2/4, 3/4, 4/4, and 5/4 the BPM counts quarter notes.

Can I set the tempo by tapping?

Yes. Press the Tap button in time with the music. From the second tap on, the tempo is set from the average gap between your recent taps. Pause for two seconds to start a fresh count.

What are the keyboard shortcuts?

Space starts and stops the click. The up and right arrows raise the tempo by one BPM, the down and left arrows lower it, and holding Shift changes it by five.

Does it work on a phone?

Yes, in a recent mobile browser. If you hear nothing on an iPhone, check that the silent switch is off and the volume is up. Keep the page open on screen, because some browsers pause or slow pages in the background, which can drop clicks.

Does it use my microphone or upload anything?

No. The metronome only plays sound. It never asks for the microphone, records nothing, and sends nothing anywhere.

What is the milliseconds table for?

It shows how long a quarter, eighth, and sixteenth note last at the current tempo, with dotted and triplet values. Use those times for tempo synced delay, reverb pre-delay, and similar settings.

Who makes this?

We're the small team behind Xport Studio, a private desktop app for AI vocals, stems, and mastering that processes your audio on your own machine. These free tools run on the same idea: your audio stays on your device. If you're curious about the bigger thing, take a look.

Meet Xport Studio